How to Use Transfer Stickers Correctly

1. Clean the adhesive surface and ensure there are no stains. Remove the backing paper of the transfer sticker, and attach the sticker together with the transfer film to the target position. Use a scraper to level and remove air bubbles, and finally tear off the transfer film.

2. First, clean the sticking area, remove the backing paper of the sticker, press it flat with a card at the correct position, then slowly peel off the transfer paper. If the edges are curled up, you can press again.

3. Ensure the sticking surface is clean and flat. Remove the backing film and attach it properly. Use a hard card to scrape and press, then remove the transfer film. Minor adjustments can be made immediately if needed.